SOUND ON SOUND
In the first of this two-part series, David Mellor gives us an introduction to mic polar patterns.
A valuable test for recording engineers, David Mellor gives examples of different mic types to emphasise the importance of knowing your mic collection in detail.
In this fourth and final episode, David Mellor delves into Gain Staging your plug-ins and how to avoid clipping during the mixing and mastering stages.
In this third episode David continues looking at preamps, outlines the use of VU meters, and explains the benefits of balancing a track prior to mixing.
In the second episode David Mellor focuses on gain staging during recording, by balancing mic input, preamps and gain within your DAW to achieve the optimal sound level.
David Mellor introduces us to Gain Staging in a brand new series of podcasts. In this first episode he explains the correct use of terminology and gives his three golden rules of Gain Staging.
Your camera's on-board mic might be OK for home movies, but using a separate mic and audio recorder will yield much better results.
The Command 8 and Icon have revitalised the affordable and the professional ends of Digidesign's controller range. Now Digi have turned their attention to the middle of the market, with a replacement for their tried and tested Control 24.
If you're under the impression that Class-D amplifiers are just 'three letters worse' than Class-A models, think again: Class-D technology is making an increasing impact on the live sound world by offering more power with less weight than ever before. We find out how and why...
If you've been to a large gig or a festival in recent years, you've no doubt had the pleasure of hearing line arrays of loudspeakers in action. But why are line arrays the current 'best practice' in large-scale PA, how did they evolve, and will they ever filter down to more modest gig venues?